How to Update Your AirCastPro 3

Keeping your AirCastPro 3 up to date helps ensure the best performance, compatibility, and reliability for your printing setup.

Current Software Version

The latest AirCastPro 3 software is Build 468, released in September 2026.

How to Check Your Current Version

1. Connect your iPad, phone, or computer to your AirCastPro network.
2. Open a web browser and go to the AirCastPro General Settings page at http://192.168.4.1 or http://aircastpro.local. If you cannot access the page, email support@aircastpro.com.
3. Tap or click MENU, the three lines in the top left corner.
4. Select About.
5. Locate your Build Number.

Do You Need to Update?

• Build 468: You are up to date. No further action is required.
• Build 464 through 467: Update through AirCastPro Uptime using the steps below.
• Build 463 or earlier: Submit the update request form at the bottom of this article.

We recommend keeping your software current for the latest improvements to performance and compatibility with iOS and photo booth apps.

What Is AirCastPro Uptime?

AirCastPro Uptime is a free online portal for AirCastPro 3 that lets you monitor your system and connected printers from a web browser. You can check printer status, view remaining media, and install available AirCastPro 3 software updates remotely.

Your AirCastPro 3 must be connected to the internet to communicate with Uptime.

How to Update Build 464 or Later Through Uptime

1. Register your AirCastPro 3. Visit uptime.aircastpro.com/register.html and register your unit using its UUID. Find the UUID on your AirCastPro 3 under Menu > Advanced > Global Settings > Show UUID. If your unit is already registered, sign in to your Uptime account.
2. Connect your AirCastPro 3 to the internet. Make sure the unit has an active internet connection.
3. Start the update. Open your AirCastPro 3’s page in Uptime, then tap or click the orange Update Available button at the top of the page.
   https://uptime.aircastpro.com/pages/systems.html

Running Build 463 or Earlier?

If your AirCastPro 3 is running Build 463 or earlier, please submit the form below to request update assistance.

If the form does not load, open the update request form in your browser.