AirCastPro 3 with Fiesta Booth
Use the steps below to print with your AirCastPro 3 using Fiesta version 1.10.0 or higher.
Step 1: Configure Your Event
- From your Fiesta event dashboard, select Configure Event.
- Select the PRINTING tab.
Step 2: Enable Printing
- Enable printing for your event.
- Use the Select a printer drop-down menu to choose your AirCastPro printer.
Step 3: Select Your AirCastPro Printer
Most commonly, your AirCastPro printers will appear with one printer for 4x6 prints and one printer for 2x6 strips.
For example:
- DNP_DS620
- DNP_DS620_2x6-2
Printing Both 4x6 Photos and 2x6 Strips: Fiesta version 1.10.0 or higher and AirCastPro 3 can be configured to print both sizes from the same event.
On the AirCastPro General Settings page:
- Tap the Menu button in the upper-left corner.
- Select Advanced > Global Settings.
- Check the Print Size Override box.
- Press Save.
When selecting your printer in Fiesta, choose the 4x6 AirCastPro printer, for example, DNP DS620 @ AirCastPro.
No Printers Detected?
If no printers are detected, make sure your iPad is connected to the AirCastPro hotspot.
If you are still unable to detect a printer, view the troubleshooting guide:
AirCastPro Troubleshooting Guide
Need Help?
For additional assistance, contact:
Email: support@aircastpro.com